Ramping On and Ramping Off options for some strategies

BobCAD-CAM Software Discussions Feature Requests
#1

Hello All,

Ramping On / Ramping Off Feature Requests that I believe would be beneficial to have in the software.

  1. For 2D Profile a Ramp On and Ramp Off with the Lead-in and Lead-out moves.

  2. For Pocketing strategy if we could have a Ramp Off option.( we have various ramp on options)

  3. For Flatlands strategy if we could have a Ramp Off option.( we have various ramp on options)

Also, if these ramping moves are tangential where possible to avoid sharp change of toolpath direction.

This has probably being briefly mentioned in previous posts, so I just wanted to make it a feature request here on the forum. Please let me know what you all think.

Thank you,
David.

2 Likes
#2

I Agree and asked for this several versions ago…

one reason for me is for getting cuts to blend better when I machine parts larger than the machine travels and i have to move the part…

1 Like
#3

Hi David,
absolute agree. That elegantly complements Pocket Operation: Wall Cut No/First/Last + Lead-in/out
Cheers, Harald

1 Like